Caps & Crowns · North of Boston

Protect your chimney from the top down.

A sturdy cap and a sound crown keep water, animals and debris out of your chimney. We build and install both, so your chimney stays dry, protected and ready for the season.

  • Watertight seal
  • Durable materials
  • Photos of the finished work
New chimney cap and crown installed on a brick chimney
Sealed & protectedCap and crown built to last
Chimney after a new cap and crown were installed Chimney before cap and crown work, with damage visible Before After
Real results

See the difference.

Water is the biggest threat to a brick chimney. A properly built crown and a well-fitted cap stop it at the top. Drag the slider to compare a chimney before and after our work.

  • Rain and snow kept out of the flue
  • Birds and animals kept out of the chimney
  • Cracks in the crown repaired and sealed
What's included

More than just a cover.

A cap and crown work together to keep your chimney dry and protected, all year round.

Finished chimney cap and crown on a brick chimney
Top of the chimneyWhere protection starts
01

Crown inspection

Checking the crown for cracks, gaps and wear before any work begins.

02

Crown repair or rebuild

Sealing small cracks or rebuilding a crown that's beyond repair.

03

Cap installation

A stainless or copper cap fitted to your flue, sized for proper draft.

04

Animal protection

Cap screens that keep birds, squirrels and raccoons out.

05

Waterproofing

Sealing the masonry at the top of the chimney against water intrusion.

06

Final check

A look at the finished work, with photos for your records.

Why it matters

Crown damage gets worse over time.

The crown is the concrete top of your chimney. Small cracks let water in, and water damage only spreads.

01
Stage 1

Hairline cracks

Small cracks that let a little water in each time it rains.

  • Easy to seal early
  • Caught during a routine inspection
Don't let it get here
02
Stage 2

Widening cracks

Water reaches the masonry below and starts to freeze and thaw.

  • Bricks and mortar start to spall
  • Needs repair before winter
03
Stage 3

Failed crown

The crown is cracked through, crumbling, or pulling away from the flue.

  • Water pours into the chimney
  • Full rebuild often needed

A sound crown and a fitted cap stop the cycle before it starts.

When to book

Signs your cap or crown needs attention.

Look up at your chimney now and then. If you see any of these, it's time for a closer look.

Get a Cap & Crown Quote
Water in the fireboxDrips or stains after rain point to a crown problem.
Crumbling crown or brickCracks, chips or pieces falling from the top of the chimney.
Birds or animalsNests or critters getting into the flue — a sign there's no cap or screen.
After a stormWind or falling branches can crack a crown or loosen a cap.
Buying or selling a homeA cap and crown inspection before closing.
It's been yearsOlder chimneys should be checked regularly as the crown ages.
Your project

How it works.

Simple, careful and built to last.

01

Assess

We check the cap and crown and recommend the right fix.

02

Quote

You get a clear written quote before any work starts.

03

Build

We repair or rebuild the crown and install the cap to fit your chimney.

04

Show you

We walk you through the finished work, with photos.

Get a cap & crown quote

Protect the top.

Tell us about your chimney and we'll get back to you with a quote.

  • Clear written quote
  • Photos of the finished work
  • 19 towns north of Boston

FAQ

Cap & crown questions.

Still unsure? Add your question to the form above.

What does a chimney cap do?
A cap covers the top of the flue. It keeps rain, snow, leaves and animals out, while letting smoke escape. It also stops wind from blowing back down the chimney and causing smoke in the room.
What is a chimney crown?
The crown is the concrete slab at the top of a masonry chimney. It's angled to shed water away from the flue and the brickwork below. A cracked crown lets water in, which is why it's so important to keep it in good shape.
How do I know if my crown needs repair?
Look for cracks, crumbling concrete, or water stains inside the firebox after rain. A camera inspection from the top will confirm what's going on.
Can you install a cap on any chimney?
Most chimneys can be fitted with a cap. For unusual flue shapes or sizes, we'll custom-fit a cap so it seals properly and lets your chimney draft the way it should.
How long does a cap and crown job take?
A cap installation is usually quick. Crown repair depends on how much damage there is — we'll give you a time estimate with your quote.

A dry chimney, season after season.

Book your cap and crown work before the weather turns.

Get a Cap & Crown Quote